We got the first rain in several weeks, a couple of little showers, probably less than a quarter inch, but it's a dramatic improvement on what we've had lately.
So, with rain about, I stayed in the garage and cast bullets. A family member had asked for some .38 special loads and I took the opportunity to cast some bullets. My favorite .38 special load is the Lee TL358-158SWC over 4.3 grains of Unique. This load leaves the barrel of my Model 66 at 780 fps and is accurate in every revolver we've tried it in. That same load gives us 980 fps out of my Marlin 1894 and is a lot of fun to shoot. It's a great plinking load in either the revolver or the carbine and the family has shot a lot of them over the years. The only trouble is keeping it in stock. If I ever decide to buy a progressive press, this load will be the one that the press is set up for.
Huh! It's raining again. These little piddling showers are a godsend.
Wednesday, June 23, 2010
Tuesday, June 22, 2010
The Border
It seems that the drug cartels have taken the literal high ground in the Arizona desert on the US side of the line.
Every soldier knows how to solve the problem of unwanted listening posts. If they've taken the high ground, you take it back. With fire and maneuver. Artillery is a big help and the US government has plenty of artillery.
When the government is ready to solve the problem, they have all the assets they need. At this time they don't have the moral fiber to enforce their own laws, so the lawbreakers operate at will.
Hat tip: War on Guns
Mexican drug cartels have set up shop on American soil, maintaining lookout bases in strategic locations in the hills of southern Arizona from which their scouts can monitor every move made by law enforcement officials, federal agents tell Fox News.Well, yeah, if you want to secure a supply route, you put observation posts on the route to warn of danger.
The scouts are supplied by drivers who bring them food, water, batteries for radios -- all the items they need to stay in the wilderness for a long time.That makes sense too. If you're going to have a listening post out, you have to supply it. All this is standard military practice.
“Every night we’re getting beaten like a pinata at a birthday party by drug, alien smugglers," a second federal agent told Fox News by e-mail. "The danger is out there, with all the weapons being found coming northbound…. someone needs to know about this!”I don't doubt that at all. The Federal government has been ignoring the problem for so long that the cartels are able to operate with near impunity.
Every soldier knows how to solve the problem of unwanted listening posts. If they've taken the high ground, you take it back. With fire and maneuver. Artillery is a big help and the US government has plenty of artillery.
When the government is ready to solve the problem, they have all the assets they need. At this time they don't have the moral fiber to enforce their own laws, so the lawbreakers operate at will.
Hat tip: War on Guns
Galena
This morning dawned hot and humid in Central Louisiana, and I decided that as long as the weather was going to be miserable, I might as well do a miserable job. So, I got out the burner and started smelting lead. A month or so ago, I found a half-bucket of wheelweights I had forgotten I had, and I still had some lead left over from my last scrounging trip that needed to be processed into ingots.
So, I got out my burner and my implements and set up in the driveway after Milady left for work.

The above picture shows what I call wheelweight stew. At some point after you dump the wheelweights in the smelting pot, the metal becomes almost plastic, just before it melts. In these days of zinc wheelweights, it behooves us to keep the heat low and skim the metal frequently to remove the zinc wheelweights before the melt into the mix. Zinc is bad when we're making bullets and we don't want it in our metal.
I use three ingot molds when I'm smelting lead, dependent on the alloy that I might be melting. Square ingots are pure lead. Corn-stick ingots are wheelweight metal and smooth sticks are linotype. Here you see a pile of square ingots and corn-stick ingots. I didn't process any linotype metal today.
It's noon now and the fire is out. I'm out of metal and I hear a thunderstorm to the west. I think I'll go cool off too and put all this up in an hour or so.
So, I got out my burner and my implements and set up in the driveway after Milady left for work.

The above picture shows what I call wheelweight stew. At some point after you dump the wheelweights in the smelting pot, the metal becomes almost plastic, just before it melts. In these days of zinc wheelweights, it behooves us to keep the heat low and skim the metal frequently to remove the zinc wheelweights before the melt into the mix. Zinc is bad when we're making bullets and we don't want it in our metal.
I use three ingot molds when I'm smelting lead, dependent on the alloy that I might be melting. Square ingots are pure lead. Corn-stick ingots are wheelweight metal and smooth sticks are linotype. Here you see a pile of square ingots and corn-stick ingots. I didn't process any linotype metal today.
It's noon now and the fire is out. I'm out of metal and I hear a thunderstorm to the west. I think I'll go cool off too and put all this up in an hour or so.
Monday, June 21, 2010
Anniversary
Today's my wedding anniversary, but like so many other anniversaries, Milady and I decided to celebrate it last night. She's got to work tomorrow and we knew that a full-blown celebration wouldn't be a good idea for tonight, so we slipped off last night and spent a night alone in a cheap hotel.
Not really, we went to Markville, LA, where I had a room booked at the local casino. We played awhile, we had a good meal, and we got up this morning and watched the morning news on the television.
I celebrate my marriage every day because I am married to the most exciting woman I've ever met. I was lucky enough to marry my best friend and she's the one woman I want to spend time with. I'm a very lucky man.
Not really, we went to Markville, LA, where I had a room booked at the local casino. We played awhile, we had a good meal, and we got up this morning and watched the morning news on the television.
I celebrate my marriage every day because I am married to the most exciting woman I've ever met. I was lucky enough to marry my best friend and she's the one woman I want to spend time with. I'm a very lucky man.
Sunday, June 20, 2010
Sunday Morning Dawg
The dog likes his ice cream. Occasionally, Milady and I enjoy a Coke float while watching TV in the evening and the dog begs for a taste. Milady has begun giving him a half-scoop of ice cream so that her appreciation of her treat won't be tarnished by the unrequited whining of the dog.
Here, he has his face in the bowl trying to get the last drop from his ration.

The preferred ice cream? Blue Bell Homemade Vanilla, of course.
Here, he has his face in the bowl trying to get the last drop from his ration.

The preferred ice cream? Blue Bell Homemade Vanilla, of course.
Saturday, June 19, 2010
Shaved Ice?
It's called a snowcone, dumbass. Personally, I like the Blue Bubblegum. Grandson Zachary likes the Tiger Blood.
Calling it something else doesn't make it trendy.
Jeeze!
Calling it something else doesn't make it trendy.
Jeeze!
Tough
It seems that lawmakers don't like being videotaped while talking with constituents.
If you don't want embarrassing video on the internet, don't embarrass yourself in front of a camera. And, just as in law enforcement, you have to assume that you're always being videotaped.
So, if you're a public servant and don't like being videotaped, find another line of work. Don't whine about it. No one wants to hear it.
Lawmakers are increasingly frustrated with guerrilla-style reporters, bloggers and campaign operatives who ambush them on video to provoke an aggressive or outraged response.Well, that's tough. Lawmakers work for the citizens and even cell phones have video capabilities nowadays.
Members of both parties want to see the unedited video of the latest high-profile incident, in which Rep. Bob Etheridge (D-N.C.) grabbed a pair of young men with video recorders who asked him if he supports “the Obama agenda.” The lawmakers wonder if he was provoked or a victim of selective editing.
If you don't want embarrassing video on the internet, don't embarrass yourself in front of a camera. And, just as in law enforcement, you have to assume that you're always being videotaped.
So, if you're a public servant and don't like being videotaped, find another line of work. Don't whine about it. No one wants to hear it.
Friday, June 18, 2010
Retrainer V
I've been standing on a 20 acre aircraft ramp in upper 90 degree temps for the past six hours. Plenty of water, but damned little shade. We were practicing offensive driving, which is plenty different from defensive driving. Pursuit driving, high speed cornering, braking reaction, and steering reaction.
It was good training, very good training, but damn, it was hot on that pavement. Now, I am officially finished with this year's retraining.
PawPaw's going to be looking for someplace cool the rest of the afternoon.
It was good training, very good training, but damn, it was hot on that pavement. Now, I am officially finished with this year's retraining.
PawPaw's going to be looking for someplace cool the rest of the afternoon.
Thursday, June 17, 2010
South Carolina Hilarity
The rollicking good time in South Carolina continues with the loser of the election trying to get the election thrown out over voting machine irregularities. It doesn't seem to matter that the elected nominee, Alvin Greene, won with 59% of the vote. No! What's important is that a middle-class, black veteran beat a white, upper-class career politician in the primary.
And the Democrats say that the Republicans are racist. This is too much fun to watch.
The state party's 92-member executive committee is meeting in Columbia to hear a protest by former state lawmaker Vic Rawl. Earlier this week, Rawl filed an official protest of the primary results, arguing that malfunctions in voting machines or software may have caused him to lose the June 8 Democratic primary to political unknown Alvin Greene.I hope Rawl prevails in his protest and the state Democratic party overturns the election. To have the state politicos overturning a popular vote to appoint a career politician over an unknown newcomer would be priceless. The media backlash would be exquisite.
Greene, 32, stunned the party establishment when he defeated Rawl in the primary to see who would face GOP U.S. Sen. Jim DeMint, the heavy favorite in the fall. Greene won with 59 percent of the vote to Rawl's 41 percent.
And the Democrats say that the Republicans are racist. This is too much fun to watch.
Practical Accuracy
Much is made these days of the ability of a particular rifle to shoot groups into one inch at 100 yards, commonly called MOA (or Minute of Angle). Technically and mathematically, that's not precise, but it's close enough for most shooters. In the last ten years we've seen multiple manufacturers try to modify their manufacturing methods to wring this level of accuracy out of their firearms.
I think it was Townsend Whelen who famously said that "only accurate rifles are interesting", and many of us strive for that elusive one-hole group as a vindication of our handloading methods and the quality of our rifles. I myself am guilty of that. I have two rifles that will turn in groups under one inch regularly with a variety of my handloaded ammunition.
However, the standard rifle for many of us is a deer rifle and the vast majority of deer in this country are taken at less than 200 yards. Indeed, if we kept good records I'd suspect that the bulk of whitetail deer are shot at ranges under 100 yards. So, the question becomes, do we need a rifle that will take the wings off a horsefly at 300 yards? The whitetail deer's heart-lung area gives us a target of about nine inches at whatever yardage we choose to shoot him. Certainly we don't need a minute-of-angle rifle to do that job.
Most of us can't hold that closely without much training and practice, especially in the field where we find our targets. Shooting off the bench is one thing, and it's a good thing to align your scope and test your loads. However, once the loads are tested and the sights are aligned, many of us would profit from moving away from the bench and shooting at indeterminate ranges using field expedient positions. Offhand, kneeling and prone are probably three of the most used field positions. If you're a stand hunter like I am, I'd propose shooting from the stand position. That's normally seated, using whatever expedient rest is available from your particular set-up.
I have one rifle that doesn't give me minute-of-angle, but I'm finding that I can place a bullet within two inches of my aiming point at virtually any time I choose to shoot that rifle. That's not dependent on weather, or position, or whether the stars are aligned. I can hit a 9" plate with that rifle at 200 yards virtually whenever I choose to do so. I'm now confident in the rifle and the load and I can work on my personal technique, striving to become a better marksman. Interestingly, this rifle is probably the least expensive of my battery, a single-shot Handi rifle chambered in .308 Winchester. I gave under $200.00 for it out of a pawn shop rack.
It's the heat of the summer and many of us are already thinking about the upcoming hunting season. Before too many more weeks, the loads should be ready and the sights aligned. It's time to quit worrying about the minutia and begin working on practical accuracy. Get away from the bench and see how we can shoot. It'll make us better hunters and our marksmanship will surely improve between now and November.
Just as Townsend Whelen said that only accurate rifles are interesting, Jeff Cooper said that "only hits count". Let's try to work on hitting.
I think it was Townsend Whelen who famously said that "only accurate rifles are interesting", and many of us strive for that elusive one-hole group as a vindication of our handloading methods and the quality of our rifles. I myself am guilty of that. I have two rifles that will turn in groups under one inch regularly with a variety of my handloaded ammunition.
However, the standard rifle for many of us is a deer rifle and the vast majority of deer in this country are taken at less than 200 yards. Indeed, if we kept good records I'd suspect that the bulk of whitetail deer are shot at ranges under 100 yards. So, the question becomes, do we need a rifle that will take the wings off a horsefly at 300 yards? The whitetail deer's heart-lung area gives us a target of about nine inches at whatever yardage we choose to shoot him. Certainly we don't need a minute-of-angle rifle to do that job.
Most of us can't hold that closely without much training and practice, especially in the field where we find our targets. Shooting off the bench is one thing, and it's a good thing to align your scope and test your loads. However, once the loads are tested and the sights are aligned, many of us would profit from moving away from the bench and shooting at indeterminate ranges using field expedient positions. Offhand, kneeling and prone are probably three of the most used field positions. If you're a stand hunter like I am, I'd propose shooting from the stand position. That's normally seated, using whatever expedient rest is available from your particular set-up.
I have one rifle that doesn't give me minute-of-angle, but I'm finding that I can place a bullet within two inches of my aiming point at virtually any time I choose to shoot that rifle. That's not dependent on weather, or position, or whether the stars are aligned. I can hit a 9" plate with that rifle at 200 yards virtually whenever I choose to do so. I'm now confident in the rifle and the load and I can work on my personal technique, striving to become a better marksman. Interestingly, this rifle is probably the least expensive of my battery, a single-shot Handi rifle chambered in .308 Winchester. I gave under $200.00 for it out of a pawn shop rack.
It's the heat of the summer and many of us are already thinking about the upcoming hunting season. Before too many more weeks, the loads should be ready and the sights aligned. It's time to quit worrying about the minutia and begin working on practical accuracy. Get away from the bench and see how we can shoot. It'll make us better hunters and our marksmanship will surely improve between now and November.
Just as Townsend Whelen said that only accurate rifles are interesting, Jeff Cooper said that "only hits count". Let's try to work on hitting.
Wednesday, June 16, 2010
.223 and 5.56
Much has been made of the difference between .223 ammo and 5.56 NATO ammo. While they look alike, perform alike, they're not alike. Knowledgeable gunnies know the difference. Go to The Gun Zone for a complete discussion, but generally, 5.56mm NATO ammo is loaded to a higher pressure level than .223 Remington, and the military chambering normally has a longer leade than sporting rifles. It's generally considered unsafe to use 5.56 mm ammo in sporting rifles chambered for .223 Remington.
However, my Bushmaster is specifically marked for both ammo types, which indicates to me that it has the longer leade and was proofed for the military ammo. It's perfectly safe to fire the .223 Remington in that rifle.
However, today when we were at the range, I noticed something that I had never noticed before. The boxes of ammo we were issued were marked as 5.56. While I'm sure that Winchester makes a lot of ammo for our military, I had never seen it sold in a commercial box. All military ammo I ever used was packaged in a plain brown cardboard box. Yet, plain as day, I had a box of Winchester ammo marked 5.56 mm.

I thought that was odd enough that it merited its own blog post.
However, my Bushmaster is specifically marked for both ammo types, which indicates to me that it has the longer leade and was proofed for the military ammo. It's perfectly safe to fire the .223 Remington in that rifle.
However, today when we were at the range, I noticed something that I had never noticed before. The boxes of ammo we were issued were marked as 5.56. While I'm sure that Winchester makes a lot of ammo for our military, I had never seen it sold in a commercial box. All military ammo I ever used was packaged in a plain brown cardboard box. Yet, plain as day, I had a box of Winchester ammo marked 5.56 mm.

I thought that was odd enough that it merited its own blog post.
Retrainer III
I qualified on everything shooty today. My duty pistol, my back-up, the shotgun and the rifle. Shot my little 5-shot Model 60 until it was too hot to hold. I shot until I wore a blister on my trigger finger, then got a band-aid and shot some more.
There isn't anything like recoil therapy to put a smile on my face. I think I'm going to get in my easy chair and take a nap.
There isn't anything like recoil therapy to put a smile on my face. I think I'm going to get in my easy chair and take a nap.
Tuesday, June 15, 2010
Retrainer II
Today I won one and I lost one in force-on-force. The one I won, I managed to piss off the instructor, get into the fight before my lieutenant, get the bad guy and come out unscathed. The best part was pissing off the instructor, so we'll call that a two-fer. I think it had to do something with handcuffs, but I don't really remember.
Tomorrow is range quals and I'm okay with that. I get to shoot the Sheriff's ammo. That beats the hell out of shooting my own.
And to answer Termite's question, no I don't have to get Tazed and sprayed every year. Some things last longer than a year.
I've got to put together a range bag.
Tomorrow is range quals and I'm okay with that. I get to shoot the Sheriff's ammo. That beats the hell out of shooting my own.
And to answer Termite's question, no I don't have to get Tazed and sprayed every year. Some things last longer than a year.
I've got to put together a range bag.
Monday, June 14, 2010
Retrainer
Busy all day, running active shooter scenarios. I have cleared more rooms today than I knew existed in one hallway. We cleared halls singly, in pairs, in groups, over and over and over.
Tomorrow, the same. With paintballs. I am not looking forward to it, but for every drop of sweat in training, we save a drop of blood in practice and no one has ever drowned in his own sweat.
After tomorrow, we get to spend a day shooting the Sheriff's ammo. That'll be cool.
Tomorrow, the same. With paintballs. I am not looking forward to it, but for every drop of sweat in training, we save a drop of blood in practice and no one has ever drowned in his own sweat.
After tomorrow, we get to spend a day shooting the Sheriff's ammo. That'll be cool.
Sunday, June 13, 2010
Sunday Morning Dawg
The dog likes to lie on the tiles in front of the fireplace. He can watch our comings and goings and properly supervise the activities. He watches me closely to see if I have food. Food is enough to get him off his tile.

No food, no movement.

No food, no movement.
Saturday, June 12, 2010
Legal Hubris
I followed a link talking about the hubris of would-be lawyers. Sounds like they're perfectly suited to be lawyers, if hubris is one of the qualifications. I'd be more likely to say that lawyers are full of crap, but hubris is a good enough word for educated folks.
Then I followed another link to an article about some kid killing time by going to law school.
Then this guy really pisses me off.
The profession of arms is a profession of honor, and I won't be besmirched by being compared to an ambulance-chasing, drunk defending lawyer. My profession revolves around concepts like duty, and honor, and service.
There are some things that no honorable person would defend, and I've seen nothing that some lawyers won't defend.
Hubris, indeed.
Then I followed another link to an article about some kid killing time by going to law school.
But why would you make a major career decision on the basis of “kill[ing] time”? For the rest of his life, he’ll be typecast as a lawyer,Good question. Why anyone would want to be a lawyer, which is just barely better than a labor union leader, according to some polls? I'll answer that question. It's pretty easy from what I've seen. Just about any idiot can become a lawyer if he or she is willing to put up with the bullshit, and has enough hubris.
Then this guy really pisses me off.
I mean, it’s pretty easy to kill a man, and I’m sure being lethal has benefits in lots of areas of life. But you wouldn’t sign up for U.S. Army training without having at least a basic understanding of what soldiers do and what challenges soldiers are likely to face. Boot camp isn’t something you do to “kill time.”Oh, you think it's easy? Sounds just like a god-damned lawyer. Worthless sonofabitch! When did you serve? You have no clue why someone would join the Army. Many thousands of young men and women have joined when they couldn't see any other way out of a bad situation, either home, or job, or personal. Yet they served. Honorably.
The profession of arms is a profession of honor, and I won't be besmirched by being compared to an ambulance-chasing, drunk defending lawyer. My profession revolves around concepts like duty, and honor, and service.
There are some things that no honorable person would defend, and I've seen nothing that some lawyers won't defend.
Hubris, indeed.
Friday, June 11, 2010
Friday Range
I went to the range this morning and had the rifle line all to myself. I spent a couple of hours working with the Handi in .30-30 Winchester and the .223 Handi.
That .223 doesn't like any factory ammo I feed it. I guess I'll have to start reloading for that caliber if I want to find a load for that little rifle. Factory ammo is shooting into about four inches and I'm not satisfied with that.
I had done a ladder test last week with the .30-30 Handi, using three powders, IMR 4895, IMR 3031, and Reloder 15. The 4895 and RL15 showed me some interesting targets, so I had loaded some rounds with the recipes that showed me the most consistency.
I used the Hornady A-Mas 155 grain bullet as a test bed. This bullet shows good accuracy in most .30 caliber rifles I've used it in, and I keep a supply on my bench.

That target was shot at 100 yards with a cold barrel. I haven't put it over the chronograph yet, but the manuals tell me that it should be running somewhere between 2200-2300 fps. I'll do that next week, while I adjust the scope to the load.
It's not MOA, but this is a a 7.8 pound single shot hunting rifle. I'm very pleased with this load in this rifle.
The range I'm using has a gong at the 200 yard line, a 1-foot square piece of metal dangling from a sawhorse. I took the last two rounds of this load and shot that going, hitting it two times.
It'll be interesting to see what the chronograph says.
That .223 doesn't like any factory ammo I feed it. I guess I'll have to start reloading for that caliber if I want to find a load for that little rifle. Factory ammo is shooting into about four inches and I'm not satisfied with that.
I had done a ladder test last week with the .30-30 Handi, using three powders, IMR 4895, IMR 3031, and Reloder 15. The 4895 and RL15 showed me some interesting targets, so I had loaded some rounds with the recipes that showed me the most consistency.
I used the Hornady A-Mas 155 grain bullet as a test bed. This bullet shows good accuracy in most .30 caliber rifles I've used it in, and I keep a supply on my bench.

That target was shot at 100 yards with a cold barrel. I haven't put it over the chronograph yet, but the manuals tell me that it should be running somewhere between 2200-2300 fps. I'll do that next week, while I adjust the scope to the load.
It's not MOA, but this is a a 7.8 pound single shot hunting rifle. I'm very pleased with this load in this rifle.
The range I'm using has a gong at the 200 yard line, a 1-foot square piece of metal dangling from a sawhorse. I took the last two rounds of this load and shot that going, hitting it two times.
It'll be interesting to see what the chronograph says.
Thursday, June 10, 2010
Alvin Greene - Candidate
It seems there's this guy in South Carolina who wandered in to the state headquarters with the filing fee and registered to run as the Democratic nominee for US Senate.
All perfectly legal, all perfectly American. The guy wanted to get into politics and he started with a US Senate race. One problem is that no one knows him.
Oh! There is the one problem with the pornography charge, but Greene hasn't been convicted and he has no comment.
Ain't politics grand?
All perfectly legal, all perfectly American. The guy wanted to get into politics and he started with a US Senate race. One problem is that no one knows him.
An unemployed military veteran who raised no funds and put up no campaign website shocked South Carolina's Democratic Party leadership by capturing the nomination Tuesday to face Republican U.S. Sen. Jim DeMint in November.He says he won by old-fashined campaigning, going house to house, shaking hands and talking to people.
State Democratic Party Chairwoman Carol Fowler said voters unfamiliar with either candidate may have voted alphabetically for Greene over Rawl. "As far as I know, he never showed up at anything. Vic Rawl has been campaigning everywhere from the time he filed," she said.Yeah, well, Rawl obvviously didn't campaign as effectively as Greene campaigned. Greene got 60% of the vote. That's not an accident. And he's now the Democratic nominee to run against Jim DeMent for the US Senate.
Oh! There is the one problem with the pornography charge, but Greene hasn't been convicted and he has no comment.
Ain't politics grand?
Redirect the Mississippi?
I don't know how many of you caught it, but last night on Anderson Cooper's CNN show, Douglas Brinkley said that the administration is considering redirecting the Mississippi River into the marshes to help clean out the oil and restore wetlands that are being lost to coastal erosion.
I hope they know what they're doing. The Mississippi River has been trying to go down the Atchafalaya for several decades now. If it weren't for the Old River control structure, the Mississippi would have made a right turn near Three Rivers and headed for Morgan City. The river at New Orleans would be brine, and a whole 'nuther story would be written.
Well, now the Mississippi River has to be redirected. It's going to have to be flooded and sediment pumped into these marshlands to save it. I think the Obama administration...He got interrupted and I sat up in my chair, wondering if I had heard correctly.
This is a turning point. There is an appetite on Capitol Hill for Gulf recovery act. The Mississippi River is going to have to be redirected into the marshlands. And BP and Transocean and other, you know, operations, Cameron, other companies are going to have to pay up to $10 billion and $15 billion for breaking national acts.Really!
I hope they know what they're doing. The Mississippi River has been trying to go down the Atchafalaya for several decades now. If it weren't for the Old River control structure, the Mississippi would have made a right turn near Three Rivers and headed for Morgan City. The river at New Orleans would be brine, and a whole 'nuther story would be written.
Jungle Primary
I see that California is going to an open primary system. Ha! Serves them right!
Louisiana has been using that system for years. It was conceived by Edwin Edwards, our now convicted governor as a way to even the score with Republicans. In Louisiana, back in the day, nearly everyone was registered Democrat. If you wanted to run for elective office, you might face ten or twelve challengers in the primary race. If you succeeded in an expensive, bruising primary, you emerged battered and scarred with most of your money spent. The Republicans would hold a conference and put someone on the ticket. Then, the Democrat candidate would face a fresh candidate in the general election.
Edwards thought that this was patently unfair and worked for an open primary system so that the Republicans had to get out and mix it up in the primary system. It's led to some interesting results, like the race where Louisiana voters woke up one Sunday morning and found that they were facing a choice between Edwin Edwards (a crook, but we love him) and David Duke, at that time the grand wizard of the Ku Klux Klan. I can remember seeing bumper stickers in that race that said "Vote for the Crook, it's important."
SO, to you folks in California. Good luck with that.
Louisiana has been using that system for years. It was conceived by Edwin Edwards, our now convicted governor as a way to even the score with Republicans. In Louisiana, back in the day, nearly everyone was registered Democrat. If you wanted to run for elective office, you might face ten or twelve challengers in the primary race. If you succeeded in an expensive, bruising primary, you emerged battered and scarred with most of your money spent. The Republicans would hold a conference and put someone on the ticket. Then, the Democrat candidate would face a fresh candidate in the general election.
Edwards thought that this was patently unfair and worked for an open primary system so that the Republicans had to get out and mix it up in the primary system. It's led to some interesting results, like the race where Louisiana voters woke up one Sunday morning and found that they were facing a choice between Edwin Edwards (a crook, but we love him) and David Duke, at that time the grand wizard of the Ku Klux Klan. I can remember seeing bumper stickers in that race that said "Vote for the Crook, it's important."
SO, to you folks in California. Good luck with that.
Wednesday, June 09, 2010
Handi .30-30
Progress continues on shooting the Handi rifle in .30-30 Winchester. The guys over at Graybeards Outdoors Forums tell me that the .30-30 is one of the great Handi rifles and I admit to doubting them when I couldn't get mint to shoot. After working through a dozen different loads I began to suspect that the scope on the rifle was not holding zero.
So, yesterday while I was out running errands I stopped by a box store to look at their scopes. I found a Nikon Prostaff Classic rimfire scope. It's a fixed 4X. I mounted it yesterday afternoon and this morning took the rifle to the range. Yeah, I know it's a rimfire scope and that the parallax is set at 50 yards. However, if you've ever used a Nikon camera, you'll appreciate the quality of their lenses. The folks at Midway USA give this little scope a 5-star rating even on hard-kicking centerfire rifles.
I bought a set of Nikon binoculars several years ago and they stay in my hunting bag. I've been really happy with the brightness and clarity of those binoculars and thought that I'd give the little Nikon scope a test drive.
The little scope is very bright and the reticle is very clear. Eye relief seems to be about 4", which is plenty of relief. It sits low on the rifle and it's very easy to get a good cheek weld on the stock, while still providing enough room for the hammer to move.
Shooting prone, off the ground at the range, I was able to keep all the shots inside two inches. One load, featuring a 155 grain bullet and IMR 4895 powder showed real promise with less than 1/2 inch of vertical dispersion. I haven't put that load over the chrony yet, but the book tells me that I should be getting about 2100 fps out of that particular load.
Now that the scope is dialed in, it should be an easy task to find the load that this little rifle prefers.
So, yesterday while I was out running errands I stopped by a box store to look at their scopes. I found a Nikon Prostaff Classic rimfire scope. It's a fixed 4X. I mounted it yesterday afternoon and this morning took the rifle to the range. Yeah, I know it's a rimfire scope and that the parallax is set at 50 yards. However, if you've ever used a Nikon camera, you'll appreciate the quality of their lenses. The folks at Midway USA give this little scope a 5-star rating even on hard-kicking centerfire rifles.
I bought a set of Nikon binoculars several years ago and they stay in my hunting bag. I've been really happy with the brightness and clarity of those binoculars and thought that I'd give the little Nikon scope a test drive.
The little scope is very bright and the reticle is very clear. Eye relief seems to be about 4", which is plenty of relief. It sits low on the rifle and it's very easy to get a good cheek weld on the stock, while still providing enough room for the hammer to move.
Shooting prone, off the ground at the range, I was able to keep all the shots inside two inches. One load, featuring a 155 grain bullet and IMR 4895 powder showed real promise with less than 1/2 inch of vertical dispersion. I haven't put that load over the chrony yet, but the book tells me that I should be getting about 2100 fps out of that particular load.
Now that the scope is dialed in, it should be an easy task to find the load that this little rifle prefers.
Obama Cuts Crime
It's true that violent crime is down under President Obama, but probably not for the reasons you think.
Call it the Obama effect. The murder rate dropped 7.4 percent nationwide last year, and the administration can enjoy some of the credit - but not for the reason you might think. Mr. Obama's election sparked a surge in gun sales, and, consequently, crime rates have plummeted.The guys in Washington DC and Chicago should take note. Crime is down in places where the government isn't afraid of its citizens.
In November 2008, a total of 450,000 more people purchased firearms than had bought them in November 2007. This is a more than 10-fold increase, compared with the change in sales from November 2007 over November 2006, which was only about 35,000. The average year-to-year increase in monthly sales in the past decade averaged just 21,000.
The connection between firearm ownership and safer streets is simple and direct. Criminals realize that they face far greater risks when members of the public have the tools they need to defend themselves.It's also true that when criminals know that they have a fair chance of stumbling upon an armed victim, their chances of survival go down. Better to target those who don't have guns.
Bonus Video Dawg
This clip is for my sisters, who enjoy the dog postings.
The dog freaks out whenever Milady comes home. He watches the door and when he sees her car, he goes into conniptions. Below is a 40 second clip.
Have you ever seen such a display?
The dog freaks out whenever Milady comes home. He watches the door and when he sees her car, he goes into conniptions. Below is a 40 second clip.
Have you ever seen such a display?
Tuesday, June 08, 2010
Disconnect
I was reading an article about the voting today in several states, and I saw this rather major disconnect in the article.
As I understand the race, Ms. Angle is running as a Republican with strong Tea Party backing and she's doing quite well in the race. We'll know tonight if she succeeds. However, the Republican Party strategists in Washington have to understand that many of us don't give a tinkers damn what they think. The Republican party is out of touch with the base. They screwed it up under the second term of G.W. Bush by adopting a spending mentality and not paying attention to conservative principles.
Republican strategists in Washington, who have been eagerly anticipating the chance to knock off Mr. Reid, worry that their work could become much more difficult because they believe some of the views held by Ms. Angle will not sit well with independent voters.There's your problem, right there.
As I understand the race, Ms. Angle is running as a Republican with strong Tea Party backing and she's doing quite well in the race. We'll know tonight if she succeeds. However, the Republican Party strategists in Washington have to understand that many of us don't give a tinkers damn what they think. The Republican party is out of touch with the base. They screwed it up under the second term of G.W. Bush by adopting a spending mentality and not paying attention to conservative principles.
Monday, June 07, 2010
Savage 110
It was too hot to work today, so I headed to the range to try out those .30-06 loads I loaded last week. They feature 150 grain Nosler Ballistic Tip bullets and Reloder 19 powder.
I got set up at the 100 yard line, chatting with another shooter who was trying to zero an AR that he uses for patrol work.
After we posted fresh targets, I settled in on the bags and fired the first set of three. When I looked into the spotting scope I saw three holes, real close together.

So, I let the rifle cool off and worked with another rifle for a little while, then I got the Savage back on the bags and fired the second set of cartridges, exactly the same except for another half-grain of powder. When I looked through the spotting scope I saw a much wider dispersion. Interesting.

So, again I let the rifle cool and then loaded the third set of three cartridges. I got solid on the bags and started trying to stack them in the same hole.

Darned interesting. Both the 61.0 grain load and the 62.0 grain load shot within MOA in my old Savage. The load between them shot a group over 2 inches wide. I can't blame my technique or the rifle. It felt really solid on the bags and I tried to make every shot count. I didn't call any fliers. Each of those nine shots are as well as I can fire that rifle. I think these three targets demonstrate the difference that a half-grain of powder makes, when you take into account things like barrel harmonics.
Now that I've found the load that this particular barrel likes to shoot, I'm going to load a bunch of it and get out to the range to do chrony work and zero the scope to that particular load.
That's four loads I've found for this rifle that shoots into MOA, with two different powders and two different bullet weights. For a base-level Savage 110 with a sporter barrel and a 6X hunting scope, I am very pleased with the way it shoots.
I got set up at the 100 yard line, chatting with another shooter who was trying to zero an AR that he uses for patrol work.
After we posted fresh targets, I settled in on the bags and fired the first set of three. When I looked into the spotting scope I saw three holes, real close together.

So, I let the rifle cool off and worked with another rifle for a little while, then I got the Savage back on the bags and fired the second set of cartridges, exactly the same except for another half-grain of powder. When I looked through the spotting scope I saw a much wider dispersion. Interesting.

So, again I let the rifle cool and then loaded the third set of three cartridges. I got solid on the bags and started trying to stack them in the same hole.

Darned interesting. Both the 61.0 grain load and the 62.0 grain load shot within MOA in my old Savage. The load between them shot a group over 2 inches wide. I can't blame my technique or the rifle. It felt really solid on the bags and I tried to make every shot count. I didn't call any fliers. Each of those nine shots are as well as I can fire that rifle. I think these three targets demonstrate the difference that a half-grain of powder makes, when you take into account things like barrel harmonics.
Now that I've found the load that this particular barrel likes to shoot, I'm going to load a bunch of it and get out to the range to do chrony work and zero the scope to that particular load.
That's four loads I've found for this rifle that shoots into MOA, with two different powders and two different bullet weights. For a base-level Savage 110 with a sporter barrel and a 6X hunting scope, I am very pleased with the way it shoots.
Summertime
It wasn't quite 80 by eight, but it's going to be a scorcher. The official temp is now 83 degrees and climbing. We just might see 90 by nine on my back porch, where my all too uncalibrated thermometer hangs. Add humidity at 90% or better and going outside is like walking into a wet blanket.
Over the weekend, we went to our little local auction where we bought a used chest-freezer. About five cubic feet. I haven't owned a chest freezer in several years. The price was right and the auctioneer had it plugged in, showing that it worked. I bought it and brought it home.
Today, in the heat, would be a good time to get all the stuff out of the indoor fridge and sort through it, put a bunch of stuff in the new (to me) chest freezer.
Over the weekend, we went to our little local auction where we bought a used chest-freezer. About five cubic feet. I haven't owned a chest freezer in several years. The price was right and the auctioneer had it plugged in, showing that it worked. I bought it and brought it home.
Today, in the heat, would be a good time to get all the stuff out of the indoor fridge and sort through it, put a bunch of stuff in the new (to me) chest freezer.
Sunday, June 06, 2010
D-Day
On this date in 1944, the Allied Forces under Dwight D. Eisenhower launched Operation Overlord. The world has come to know it as D-Day.
Every military operation has a D-Day, H-Hour, the time when all forces cross the Line of Departure.
That explanation is not do distract from the heroism of the men who stormed ashore in Normandy 66 years ago. It is fitting that we should remember their sacrifice.
Every military operation has a D-Day, H-Hour, the time when all forces cross the Line of Departure.
That explanation is not do distract from the heroism of the men who stormed ashore in Normandy 66 years ago. It is fitting that we should remember their sacrifice.
Sunday Morning Dawg
With the coming of the summer months, the dog spends more time taking his leisure on the back patio. He likes to recline under the rattan furniture.

I think the concrete is cool on his belly.

I think the concrete is cool on his belly.
Friday, June 04, 2010
Helen Thomas
Helen Thomas, senior White House journalist for Hearst News, is a racist, anti-Semite. Here, she tells a journalist that the Jews should go back to Germany, or Poland.
Why people tolerate her is beyond me. The woman is an idiot, and now she's convicted herself of being an anti-Semite idiot. If our President doesn't throw her out, he's an idiot.
Why people tolerate her is beyond me. The woman is an idiot, and now she's convicted herself of being an anti-Semite idiot. If our President doesn't throw her out, he's an idiot.
Rainy Day
We awoke to rain on my little parcel of Central Louisiana. A much-needed rain that shows about an inch in my redneck rain gauge. What's a redneck rain gauge, you ask? Well, it's a mason jar sitting on a bench, away from walls and fences.
Milady decided that she wanted to mop the kitchen floors and banished me to the reloading bench until the floors dried. Oh, No! While I was there, I decided to peruse my Nosler manual to get ideas for some bullets I got from the UPS man earlier this week, and I decided to use Junior's method of jamming a bullet into the lands to get an idea of the length I should load.
My Savage 110 in .30-06 is my go-to rifle for most hunting tasks. The SAAMI overall length for the .30-06 Springfield cartridge is 3.340 inches. I partially sized a case and started a 150 grain Nosler Ballistic Tip into the case neck, then got out my Savage and chambered that round. Then I measured the COAL of the round. 3.328", shorter than the SAAMI max. Interesting. I made up another case, and jammed it again. Still 3.328. Very interesting. It must be something about my particular rifle and the ogive on that Nosler bullet.
The Nosler manual tells me that Reloder 19 powder is the most accurate they tested with that particular bullet, so I loaded some ammo and seated the bullets so they would be 0.010 off the lands.

Aren't they pretty? I loaded nine rounds, in three half-grain steps under the Nosler maximum load. Early next week I'll see how they shoot.
Milady decided that she wanted to mop the kitchen floors and banished me to the reloading bench until the floors dried. Oh, No! While I was there, I decided to peruse my Nosler manual to get ideas for some bullets I got from the UPS man earlier this week, and I decided to use Junior's method of jamming a bullet into the lands to get an idea of the length I should load.
My Savage 110 in .30-06 is my go-to rifle for most hunting tasks. The SAAMI overall length for the .30-06 Springfield cartridge is 3.340 inches. I partially sized a case and started a 150 grain Nosler Ballistic Tip into the case neck, then got out my Savage and chambered that round. Then I measured the COAL of the round. 3.328", shorter than the SAAMI max. Interesting. I made up another case, and jammed it again. Still 3.328. Very interesting. It must be something about my particular rifle and the ogive on that Nosler bullet.
The Nosler manual tells me that Reloder 19 powder is the most accurate they tested with that particular bullet, so I loaded some ammo and seated the bullets so they would be 0.010 off the lands.

Aren't they pretty? I loaded nine rounds, in three half-grain steps under the Nosler maximum load. Early next week I'll see how they shoot.
Believe
Last year, Brooks and Dunn came out with a nice song. Believe. It quickly became one of my favorites. A friend of mine just reminded me of it.
Thanks, Richard!
Thanks, Richard!
Thursday, June 03, 2010
More Job Promises
I guess when the adminstration promises us jobs, what they're talking about is federal jobs, as long as we don't run against an incumbent. First, it was the Sestak affair. Now, it's a Colorado primary.
WASHINGTON – President Barack Obama was unaware a top aide encouraged a Colorado Democrat to apply for an international development job instead of challenging the candidate whom the president favored in a Senate race, the White House said Thursday.Of course, everyone agrees that our President knew nothing of the deal.
Press Secretary Robert Gibbs faced fresh questions about another backroom political deal — the first involving a Pennsylvania candidate, now a Colorado hopeful — that put the Obama administration on the defensive. The White House acknowledged that it had contacted former Colorado House Speaker Andrew Romanoff about possible jobs in hopes of persuading him to skip the Senate primary.
Asked whether Obama was knew about the outreach, Gibbs told reporters: "He's not aware of the individual circumstances."As I recall, that's what Nixon said too.
Po'Folks
It must be terrible to be poor. All the poor folks are eating wrong and getting fat.
That's what this idiot wants you to believe.
I've known poor folks who were raised in the country, doing the best on what they could raise in the backyard, either pork, or poultry, or beef. Plus what the family garden produced. Wonderful meals, prepared lovingly, with little or no money involved. One dear woman of my acquaintance, Mrs. Conde, lived about a half-mile from us when we lived in the country. The Conde's were po-folks but knew how to cook. When Mrs. Conde was making biscuits on a early morning, you could smell them all the way to our house. Lots of times my kids would hop on bicycles and pedal down the road when the smell of biscuits wafted down the road. I fed her kids, she fed mine. That's the way poor folks take care of each other.
Here's where he really gets it all wrong.
Hat tip to Dennis the Peasant.
That's what this idiot wants you to believe.
That said, if there’s anything I’ve learned from watching my friends attempt to navigate the kitchen, it’s that cooking isn’t obvious. Unless you’re familiar with the basics of preparation and cooking, the act of taking a few ingredients — some cornmeal, a bushel of greens, an egg — and making a meal is mystifying. Poor people are simply less likely to have access to that kind of knowledge.I don't know whathtehell he's making with cornmeal, a bushel of greens, and one egg, but I'd love to see it.
I've known poor folks who were raised in the country, doing the best on what they could raise in the backyard, either pork, or poultry, or beef. Plus what the family garden produced. Wonderful meals, prepared lovingly, with little or no money involved. One dear woman of my acquaintance, Mrs. Conde, lived about a half-mile from us when we lived in the country. The Conde's were po-folks but knew how to cook. When Mrs. Conde was making biscuits on a early morning, you could smell them all the way to our house. Lots of times my kids would hop on bicycles and pedal down the road when the smell of biscuits wafted down the road. I fed her kids, she fed mine. That's the way poor folks take care of each other.
Here's where he really gets it all wrong.
In my own shopping, I’ve noticed that people shopping at Kroger (the cheaper grocery store in the area) tend to be heavier than those shopping at Harris Teeter, and their carts tended to be heavy on processed and prepared foods. But that isn’t a surprise; the poorer you are, the more likely it is that your diet will be high in calorie dense but nutritionally poor foods, which is a recipe for obesity.It's got nothing to do with poverty, it's all about lifestyle and genetics. Diet and exercise. My own appreciable girth started about 1999 when I retired from the Guard and stopped running. I'm a fat boy for lots of reasons, but poverty doesn't have anything to do with it.
Hat tip to Dennis the Peasant.
Nosler Plant Fire
It's seems that the Nosler plant in Bend, Oregon had a fire and explosion yesterday.
Nosler is one of my favorite bullet manufacturers. I made an order last week and two boxes of bullets I ordered were Nosler Ballistic Tip bullets.
I hope they're able to get everyone back to work soon.
BEND, Ore. -- A massive explosion at an ammunition plant sent shock waves through southwest Bend Wednesday afternoon, but a quick evacuation helped save all 100 workers inside. Now, investigators are trying to figure out what happenedEveryone got out safely and investigators are seeking the cause.
It all happened around 2:15 p.m. inside the 22-year-old, 80,000-square-foot Nosler Inc. building on SW Columbia St. near Simpson Avenue.
Nosler is one of my favorite bullet manufacturers. I made an order last week and two boxes of bullets I ordered were Nosler Ballistic Tip bullets.
I hope they're able to get everyone back to work soon.
Wednesday, June 02, 2010
COAL
For those of us who piddle with such things, the Cartridge Overall Length is an important measurement to know. If you're loading for a box magazine such at the .223 Remington, you must keep your cartridge length under what will fit in the box magazine. The Sporting Arms and Ammunition Manufacturers Institute, (SAAMI) give us basic cartridge dimensions. SAAMI has set the correct overall length for the .223 Remington to be 2.260 inches.
For the .30-30 Winchester, which normally uses a flat tipped bullet, SAAMI has set the correct COAL at 2.550 inches. These are industry standards that don't takeindividual rifles into account. The fact is that all rifles are individual and if you load for a particular rifle it is prudent to know the correct overall length for your particular rifle and the particular bullet you are loading.
I'm loading .30-30 Winchester ammo for a single-shot Handi rifle and I've been playing with spitzer bullets for that rifle. Single shot rifles and pistols such as the Thompson Center Contender can use pointed bullets, where they might be dangerous in a tube magazine. So, you can seat the bullets differently, taking into account the individual peculiarities of the individual barrel.
Junior reminded me of the correct procedure for determining COAL for a particular rifle/bullet combo. For the purposes of this demonstration, we'll use the .30-30 Handi rifle I've previously discussed, and the 155 grain Hornady A-Max bullet.
According to Junior,

A 155 grain Hornady A-Max, jammed into the lands of my Handi Rifle measures 2.7825, 0.2325 inches longer than the SAAMI recommended COAL for that cartridge. If I seat the bullet to 2.2725 it'll be 0.010 off the lands. Hopefully that little difference will give me better accuracy than I've been getting from that rifle.
It's time to do a little loading.
For the .30-30 Winchester, which normally uses a flat tipped bullet, SAAMI has set the correct COAL at 2.550 inches. These are industry standards that don't takeindividual rifles into account. The fact is that all rifles are individual and if you load for a particular rifle it is prudent to know the correct overall length for your particular rifle and the particular bullet you are loading.
I'm loading .30-30 Winchester ammo for a single-shot Handi rifle and I've been playing with spitzer bullets for that rifle. Single shot rifles and pistols such as the Thompson Center Contender can use pointed bullets, where they might be dangerous in a tube magazine. So, you can seat the bullets differently, taking into account the individual peculiarities of the individual barrel.
Junior reminded me of the correct procedure for determining COAL for a particular rifle/bullet combo. For the purposes of this demonstration, we'll use the .30-30 Handi rifle I've previously discussed, and the 155 grain Hornady A-Max bullet.
According to Junior,
Partially size a fired case sizing the neck only 1/16" or so. Start a bullet. Chamber the test round letting the beginning of the lands seat the bullet. Now you know the max COAL for that particular bullet. Load 3 rounds to the max COAL minus .010" and see how they shoot.So, I went out to the bench and partially sized a .30-30 case, then partially started the bullet with my thumb. Then I chambered the bullet, allowing the lands to seat the bullet. Then, I measured the result.

A 155 grain Hornady A-Max, jammed into the lands of my Handi Rifle measures 2.7825, 0.2325 inches longer than the SAAMI recommended COAL for that cartridge. If I seat the bullet to 2.2725 it'll be 0.010 off the lands. Hopefully that little difference will give me better accuracy than I've been getting from that rifle.
It's time to do a little loading.
Electro-Motive
There's a lot of interest in electric cars these days. The Toyota Prius has been a huge success and both Chevy and Nissan are poised to come out with their own versions.
I think that diesel is a good idea. Diesel engines are torque monsters, even the smaller ones, which is why they are such a good idea in farm tractors and large trucks. You need torque if you're turning a generator to charge batteries, or the torque from the engine can directly drive the motors.
The leader in hybrid technology has been the railroad industry. These behemoths combine a diesel engine and electric motors and move freight very efficiently. I think that the motor companies missed an opportunity several years ago. A full-size pickup with a diesel engine and electric drive motors should he a very efficient vehicle, with enough "green" credentials to make even the most ardent environmentalist happy.
Oh, and people who buy straight electric vehicles are going to be plenty pissed off when the learn that their cars are (in fact), coal powered. Where do they think the electricity comes from?
I think that diesel is a good idea. Diesel engines are torque monsters, even the smaller ones, which is why they are such a good idea in farm tractors and large trucks. You need torque if you're turning a generator to charge batteries, or the torque from the engine can directly drive the motors.
The leader in hybrid technology has been the railroad industry. These behemoths combine a diesel engine and electric motors and move freight very efficiently. I think that the motor companies missed an opportunity several years ago. A full-size pickup with a diesel engine and electric drive motors should he a very efficient vehicle, with enough "green" credentials to make even the most ardent environmentalist happy.
Oh, and people who buy straight electric vehicles are going to be plenty pissed off when the learn that their cars are (in fact), coal powered. Where do they think the electricity comes from?
Tuesday, June 01, 2010
Miranda
If I arrest you, I've got to read your your rights. Normally, I take care of that as soon as possible, from a card I keep in my pocket. When you get to jail, they're going to read you your rights and ask you to sign a form that you were read your rights. If a detective asks you questions, he or she is going to read you your rights.
You have the right to remain silent. You have the right to an attorney. Etc, etc.
The Supreme Court says that if you don't want to talk to the police, all you have to do is tell them that you don't want to talk to them. If you want a lawyer, all you have to do is say that you want a lawyer. Interview over.
But, if you decide to run your mouth, you can't take it back later. The Court agrees with me.
Many times, an offender just can't help himself. He's got to argue and rant and rave on the way to the jail house. I'll normally remind him one more time that he's got the right to remain silent, then I'll start taking notes, running a recorder if I have one with me, paying attention to what's being said in the back seat of the cruiser. Then, when I do my report, I get to write down all the stuff I heard. Sometimes it's quite illuminating.
You have the right to remain silent. You have the right to an attorney. Etc, etc.
The Supreme Court says that if you don't want to talk to the police, all you have to do is tell them that you don't want to talk to them. If you want a lawyer, all you have to do is say that you want a lawyer. Interview over.
But, if you decide to run your mouth, you can't take it back later. The Court agrees with me.
Many times, an offender just can't help himself. He's got to argue and rant and rave on the way to the jail house. I'll normally remind him one more time that he's got the right to remain silent, then I'll start taking notes, running a recorder if I have one with me, paying attention to what's being said in the back seat of the cruiser. Then, when I do my report, I get to write down all the stuff I heard. Sometimes it's quite illuminating.
Pool Box
I spent the afternoon doing a carpentry project, a deck box for pool toys. I wanted to construct it of the same materials as the deck, 5/4 treated lumber, so I went to Lowe's this morning and bought a bunch of deck boards.

Damn thing is heavy. It's five feet long and 18 inches high, just the right size to double as extra seating on the deck. I hope the smaller grandkids can lift the lid.

Damn thing is heavy. It's five feet long and 18 inches high, just the right size to double as extra seating on the deck. I hope the smaller grandkids can lift the lid.
Jewelry
It's been my experience that some folks like jewelry, and that's okay. If you've got a few extra bucks and you want to spend it on something a little flashy, good for you. I had one co-worker years ago who spent a chunk of change on a Rolex watch. It looked good on him. Gave him a certain elegance that the ladies seemed to appreciate. That feminine appreciation waned quickly once they spent a few minutes talking with him, but that a whole 'nuther story.
It's also my experience that the ladies I know like a little flash. Something to commemorate an event, like an anniversary, or Christmas, or a birthday.
Back in my single days, I met a lady and asked her out. I showed up at the front door wearing a signet ring. You remember signet rings. It just happened to fit on my left-hand ring finger and she refused to go anywhere with me until I removed that ring. She told me she didn't care where else I wore it, but she wouldn't be seen with a man who wore a ring on the third finger, left hand. Fine. I took the ring off and dropped it in my pocket.
Some of this crap is just getting silly.
It's also my experience that the ladies I know like a little flash. Something to commemorate an event, like an anniversary, or Christmas, or a birthday.
Back in my single days, I met a lady and asked her out. I showed up at the front door wearing a signet ring. You remember signet rings. It just happened to fit on my left-hand ring finger and she refused to go anywhere with me until I removed that ring. She told me she didn't care where else I wore it, but she wouldn't be seen with a man who wore a ring on the third finger, left hand. Fine. I took the ring off and dropped it in my pocket.
Some of this crap is just getting silly.
Harold Thompson, who has been divorced twice and lives in Wilmington, N.C., is a founder of the D Jewelry Company, which sells divorce rings online. Its tag line: “Building self-esteem one person at a time.”Hey, look, if you need a ring on your finger for self-esteem, then you've probably got more problems than most people want to deal with. Get a tee-shirt that says "Stay Away, I've got more baggage than a Pullman cart!".
Monday, May 31, 2010
Ribs
They'll be ready about 4:00 p.m.

About 30 minutes prior to taking the ribs off, I'll put on some sausage and hot dogs for the kids.

About 30 minutes prior to taking the ribs off, I'll put on some sausage and hot dogs for the kids.
Bonus Memorial Day Dawg
The dog got a bath today and he's mildly disgusted with the entire process.

Hehehe! Get over it, Mutt!

Hehehe! Get over it, Mutt!
Divorce Rings?
This is just about the most ignorant thing I've seen lately. Divorce rings. What, they're proud of it?
I know, lots of people get divorced. Still it's nothing to be proud of. Vaguely shameful, as a matter of fact. I damned sure don't want any jewelry reminding me (and telling the world) that I'm divorced.
Or this, the wedding ring coffin. How droll!
I know, lots of people get divorced. Still it's nothing to be proud of. Vaguely shameful, as a matter of fact. I damned sure don't want any jewelry reminding me (and telling the world) that I'm divorced.
Or this, the wedding ring coffin. How droll!
Sunday, May 30, 2010
Memorial Day
This is the Memorial Day weekend and this is the obligatory Memorial Day posting.
You're welcome.
I didn't join the Army to get thanks or honor on the battlefield. I was raised with a sense of honor and a sense of duty to family that was instilled in me by my parents. I was taught to do the right thing even when the right thing caused me personal pain or expense. It hurts, sometimes, doing the right thing, but you sleep easier at night and you get to look at yourself in the morning.
I joined the Army when it wasn't cool to do so. 1973, the US was coming out of Viet Nam, returning soldiers were subjected to derision. I was a college student suddenly faced with some tough choices. Back in those days, being poverty stricken and a college student were synonymous. The Army was willing to pay me $100.00 per month to go to school which would supplement my janitor's job enough to pay the rent. I signed up and went to basic training at Fort Knox so that I could continue my quest to graduate on time.
When I got to Knox, I found a culture where a man's word counted, where there were no excuses for failure, and there was the ability to shake the dust off and excel. So, I started reading military history and trying to figure out the culture that would lead people to excel in a culture where words like Duty,Honor, Country meant something. I still remember the names of my Drill Sergeants (Anderson, Grice, and Hancock) and I am deeply indebted to them. They made a soldier of me.
Several years later came a time when I was allowed to lead and I found that the greatest challenge in the world is leading soldiers. It is a deeply humbling experience, all at once frightening, exhilarating, exhausting, and uplifting. To be allowed to lead America's soldiers is probably the greatest honor I was ever given. I was allowed help uplift the finest people America has to offer. I promoted soldiers, I buried solders, I laughed and cried and knew that I walked with heroes every day I was in uniform.
Don't thank me, I got much, much more from the Army than it got from me. Along the way I got to play with some very cool toys and do things that many people only dream about. When I retired (from the Guard) in 1999, I realized that I had been given an opportunity of personal adventure. It had been a hell of a ride, but I was too old to play with the younger kids anymore.
Some time tomorrow, I'll slip off by myself and think about the magnificent experience. I'll think about my Brigade, which is engaged in battle in the Middle East, and I'll worry about people I don't even know. That's my Brigade over there and they carry the same colors I carried.
By God, I love the Army.
You're welcome.
I didn't join the Army to get thanks or honor on the battlefield. I was raised with a sense of honor and a sense of duty to family that was instilled in me by my parents. I was taught to do the right thing even when the right thing caused me personal pain or expense. It hurts, sometimes, doing the right thing, but you sleep easier at night and you get to look at yourself in the morning.
I joined the Army when it wasn't cool to do so. 1973, the US was coming out of Viet Nam, returning soldiers were subjected to derision. I was a college student suddenly faced with some tough choices. Back in those days, being poverty stricken and a college student were synonymous. The Army was willing to pay me $100.00 per month to go to school which would supplement my janitor's job enough to pay the rent. I signed up and went to basic training at Fort Knox so that I could continue my quest to graduate on time.
When I got to Knox, I found a culture where a man's word counted, where there were no excuses for failure, and there was the ability to shake the dust off and excel. So, I started reading military history and trying to figure out the culture that would lead people to excel in a culture where words like Duty,Honor, Country meant something. I still remember the names of my Drill Sergeants (Anderson, Grice, and Hancock) and I am deeply indebted to them. They made a soldier of me.
Several years later came a time when I was allowed to lead and I found that the greatest challenge in the world is leading soldiers. It is a deeply humbling experience, all at once frightening, exhilarating, exhausting, and uplifting. To be allowed to lead America's soldiers is probably the greatest honor I was ever given. I was allowed help uplift the finest people America has to offer. I promoted soldiers, I buried solders, I laughed and cried and knew that I walked with heroes every day I was in uniform.
Don't thank me, I got much, much more from the Army than it got from me. Along the way I got to play with some very cool toys and do things that many people only dream about. When I retired (from the Guard) in 1999, I realized that I had been given an opportunity of personal adventure. It had been a hell of a ride, but I was too old to play with the younger kids anymore.
Some time tomorrow, I'll slip off by myself and think about the magnificent experience. I'll think about my Brigade, which is engaged in battle in the Middle East, and I'll worry about people I don't even know. That's my Brigade over there and they carry the same colors I carried.
By God, I love the Army.
Sunday Morning Dawg
Every afternoon, the dog and I have to play Chase The Ball. He finds his ball and brings it to me, and he and I play in the hallway. This afternoon was no different.

The ball might change, but the game remains the same.

The ball might change, but the game remains the same.
Friday, May 28, 2010
Range Day
I got some trigger time today with two of my Handi Rifles. The .223 Ultra and the .30-30 Hunter. Nothing special to write home about, but I'm learning their peccadilloes and having fun. The .30-30 is proving problematic, but I've narrowed down the possible loads. The ladder test works, and I'm convinced that I'm on the way to finding a good load for the .30-30.
Second son came with me, to shoot his Savage 11 in 7mm Magnum and his Ruger 77 in .25-06. The Ruger is a hunting rifle, plain and simple, with a sporter barrel, a wooden stock, and a fixed power scope. We were easily able to hit a 200 yard gong with that rifle. He's confident now that any deer he sees he can hit.
We went out to the 300 yard berm and he put up a target to try to wring out his Savage. We long ago found a load or 4831 shooting a Nosler Ballistic Tip bullet that his rifle really likes. It easily shoots MOA when he does his part, but he's never shot it over 200 yards.

First and second shots nearly touching at 300 yards, 2 inches above the mark. Third through sixth shots opened up as the barrel heated. The first two inside half an inch, the last four inside 4 inches. The orange target is a 4" target dot. Any of those shouts would be inside the kill area on a deer. That's fine shooting.
Second son came with me, to shoot his Savage 11 in 7mm Magnum and his Ruger 77 in .25-06. The Ruger is a hunting rifle, plain and simple, with a sporter barrel, a wooden stock, and a fixed power scope. We were easily able to hit a 200 yard gong with that rifle. He's confident now that any deer he sees he can hit.
We went out to the 300 yard berm and he put up a target to try to wring out his Savage. We long ago found a load or 4831 shooting a Nosler Ballistic Tip bullet that his rifle really likes. It easily shoots MOA when he does his part, but he's never shot it over 200 yards.

First and second shots nearly touching at 300 yards, 2 inches above the mark. Third through sixth shots opened up as the barrel heated. The first two inside half an inch, the last four inside 4 inches. The orange target is a 4" target dot. Any of those shouts would be inside the kill area on a deer. That's fine shooting.
Thursday, May 27, 2010
Pot Roast
It's been a while since I cooked a pot roast and I found myself in the mood for one today. This was a staple of my childhood. My grandfather cooked a pot roast for Sunday dinner nearly every Sunday that he was alive. Some call it German Pot Roast and with my heritage, that makes sense. It uses a roux, which is generally considered Cajun cooking, but it's good food.
First, we start with a beef roast. It doesn't matter what cut, it's going to be "falling apart" tender.

I put a couple of tablespoons of oil in a black dutch oven, and add a little minced garlic for flavor. Let the oil get hot, you'll see the garlic sauteing when the time is right.

Sear the beef. With a big meat fork, put it in the oil. Let the hot oil sear the beef. Turn it until it's completely seared, then take it out of the oil. Set it aside, it's time to make a roux.

Add flour to the oil and stir it. The flour suspends in the oil and cooks. The flour on the bottom of the pot cooks more quickly, so you have to stir the roux. Stir it non-stop, you're only going to be here three or four minutes, but if you walk off it will burn. You cannot leave a roux. You'll notice at the top left of the photo, a large container of water. I don't leave my roux long enough to get water, I have it ready for when the roux is the proper color. The color in the photo is about right. Keep stirring and add the water. Some of the water will flash to steam, but that's okay, you're making gravy.

Put the seared roast in the gravy. Add a whole onion, a little salt and pepper. You can add some carrots if you like, but if you put potatoes in the pot, they'll cook to nothing. We're basically boiling this piece of beef in gravy. When it comes out, it'll be tender and mouth-watering.
Put a lid on the dutch oven and put it in a 350F oven for 4 hours. Four hours later, let's take a look.

I think in another hour, it'll be time to make a pot of rice.
First, we start with a beef roast. It doesn't matter what cut, it's going to be "falling apart" tender.

I put a couple of tablespoons of oil in a black dutch oven, and add a little minced garlic for flavor. Let the oil get hot, you'll see the garlic sauteing when the time is right.

Sear the beef. With a big meat fork, put it in the oil. Let the hot oil sear the beef. Turn it until it's completely seared, then take it out of the oil. Set it aside, it's time to make a roux.

Add flour to the oil and stir it. The flour suspends in the oil and cooks. The flour on the bottom of the pot cooks more quickly, so you have to stir the roux. Stir it non-stop, you're only going to be here three or four minutes, but if you walk off it will burn. You cannot leave a roux. You'll notice at the top left of the photo, a large container of water. I don't leave my roux long enough to get water, I have it ready for when the roux is the proper color. The color in the photo is about right. Keep stirring and add the water. Some of the water will flash to steam, but that's okay, you're making gravy.

Put the seared roast in the gravy. Add a whole onion, a little salt and pepper. You can add some carrots if you like, but if you put potatoes in the pot, they'll cook to nothing. We're basically boiling this piece of beef in gravy. When it comes out, it'll be tender and mouth-watering.
Put a lid on the dutch oven and put it in a 350F oven for 4 hours. Four hours later, let's take a look.

I think in another hour, it'll be time to make a pot of rice.
Load Development, Ladder Test
When we get a new gun, we want to find out the load that it likes to shoot. The old standard method was to search all the available data for a workable bullet/powder combo, then load some ammo in increments, usually five cartridges each, in varying powder weights. For example, you might load five cartridges at 30 grains, 5 cartridges at 30.5 grains, five cartridges at 31.0 grains, and continue until you've got 30 or 40 rounds of ammo. Then, you get out to the range and shoot them, trying to determine what combo works best. This is sometimes a frustrating technique because it burns a lot of powder and uses a lot of bullets. In these hard economic times, bullets and powder are expensive, if you can find them. The ammo shortage of '09-'10 continues to haunt us.
I've been casting about for a better way to conduct load development and I went over to the Accurate Shooter website and found an article entitled Long Range Load Development. I'm not benchrest shooter, but I understand that those folks with the funny looking rifles have thought a lot about rifle shooting and they've done some great things with accuracy. Perchance I can learn something from them.
The concept is fairly simple. Pick a powder/bullet combination, then start low and load in increments. It makes sense that as the powder charge increases, the bullet goes faster, so the bullet is going to strike higher on the target. At some point, the barrel harmonics should show two or three bullets striking the paper fairly close together. That's your sweet spot for that powder/bullet combo and further load testing will show where the most accurate load is for that combo.
I've got a new .30-30 I need to test and I've got some range-time scheduled for tomorrow. Today, I picked a powder bullet combo and looked in the literature. From lowest charge to published maximum is 3.2 grains of powder, so I loaded six cartridges at the minimum for sighters and started stepping up the charge in 0.3 grain increments to the maximum. If the benchrest guys are right, then the shots should march up the paper. At some point I'll find the sweet spot in that barrel and I'll know where to start for further load development.
Or, I'll find out with 15 shots that the barrel doesn't like that powder/bullet combination. Either way, I'll learn something tomorrow morning.
I've been casting about for a better way to conduct load development and I went over to the Accurate Shooter website and found an article entitled Long Range Load Development. I'm not benchrest shooter, but I understand that those folks with the funny looking rifles have thought a lot about rifle shooting and they've done some great things with accuracy. Perchance I can learn something from them.
The concept is fairly simple. Pick a powder/bullet combination, then start low and load in increments. It makes sense that as the powder charge increases, the bullet goes faster, so the bullet is going to strike higher on the target. At some point, the barrel harmonics should show two or three bullets striking the paper fairly close together. That's your sweet spot for that powder/bullet combo and further load testing will show where the most accurate load is for that combo.
I've got a new .30-30 I need to test and I've got some range-time scheduled for tomorrow. Today, I picked a powder bullet combo and looked in the literature. From lowest charge to published maximum is 3.2 grains of powder, so I loaded six cartridges at the minimum for sighters and started stepping up the charge in 0.3 grain increments to the maximum. If the benchrest guys are right, then the shots should march up the paper. At some point I'll find the sweet spot in that barrel and I'll know where to start for further load development.
Or, I'll find out with 15 shots that the barrel doesn't like that powder/bullet combination. Either way, I'll learn something tomorrow morning.
Wednesday, May 26, 2010
Old guns
My son tells a story about two old guns that came his way today.
I know what to do with the Model 12 and his friend has a wonderful heirloom.
The Springfield? I have absolutely no idea.
I know what to do with the Model 12 and his friend has a wonderful heirloom.
The Springfield? I have absolutely no idea.
Frustrated.
I was over at the Graybeards Outdoor Forum and there was some discussion on twist rates on the .223 Handi. Some barrels are 1:9, some are 1:12. I figured I'd check mine and see what I have. It doesn't make much difference with bullets up to 60 grains, but knowledge is a good thing.
I went out to the bench and set up with a rod, patches, bore oil, measuring device. Stuck a patch on the jag, got it started. Rod wouldn't turn. Took the rod out, checked to make sure it would turn freely. Got a thicker patch, put some oil on the patch, tried to start it. Too thick. Piddled around with another jag, another patch, rod wouldn't turn in the bore, but would turn freely in my hand. Then decided to try a bore brush wrapped in a patch. Started it in the barrel and it got stuck. Tried to push it through, bent the rod. Got vise grips and tried to pull it out. Pulled the end off of the brush. Got another rod and pushed it back through from the other end. Put a jag in the 2nd rod, put a patch on it. Tried to push it through. Broke the jag off in the end of the rod. Threw that rod in the back of the truck. It's going to the dump with the other one.
I've checked twist rates on many, many rifles. This little .22 bore has me buggered. The bore is so small and the equipment so fragile that I'm now out of .22 rods.
I guess it's time to buy a good rod for .22 bores. And a couple of good brass jags.
Recommendations?
**Update** Midway USA has a sale on Tipton carbon-fiber rods. That decides it.
I went out to the bench and set up with a rod, patches, bore oil, measuring device. Stuck a patch on the jag, got it started. Rod wouldn't turn. Took the rod out, checked to make sure it would turn freely. Got a thicker patch, put some oil on the patch, tried to start it. Too thick. Piddled around with another jag, another patch, rod wouldn't turn in the bore, but would turn freely in my hand. Then decided to try a bore brush wrapped in a patch. Started it in the barrel and it got stuck. Tried to push it through, bent the rod. Got vise grips and tried to pull it out. Pulled the end off of the brush. Got another rod and pushed it back through from the other end. Put a jag in the 2nd rod, put a patch on it. Tried to push it through. Broke the jag off in the end of the rod. Threw that rod in the back of the truck. It's going to the dump with the other one.
I've checked twist rates on many, many rifles. This little .22 bore has me buggered. The bore is so small and the equipment so fragile that I'm now out of .22 rods.
I guess it's time to buy a good rod for .22 bores. And a couple of good brass jags.
Recommendations?
**Update** Midway USA has a sale on Tipton carbon-fiber rods. That decides it.
Tuesday, May 25, 2010
National Guard to Arizona/Plug the Hole
I see that our President is going to send 1200 troops to Arizona, ostensibly to help out with the illegal migrant problem. Not that I think 1200 troops is going to be a drop in the bucket, but he gets to show that he's doing something.
Which begs a number of questions.
How can the National Guard enforce the law without being racist and profiling people? And how does that make them different from the state agencies enforcing the law? For that matter how are the state agencies enforcing the law any different from Federal agencies enforcing the law? In short, if it's racist and ill-advised to enforce Arizona's immigration law (which mirrors Federal law), and the President now is sending troops to enforce the law, does that make our President a racist?
These questions are easily asked, although it's hard to ask them without mirth.
The simple fact of the matter is that the Feds have all but abdicated responsibility on the immigration problem. They've simply done nothing. What you're seeing now is a belated attempt to put spin on a problem that demands action.
While I'm ranting, lets talk about the little spill in the Gulf. The British Petroleum disaster. It seems that the President is getting testy with aides who are briefing him on the response. "Plug the damn hole," Obama told them. I'm sure BP would love to know just how in the hell he proposes to do that. That's what they've been trying to do for over a month.
Our President has no clue how to solve our problems and he's making it up as he goes along. This Presidency is kabuki theater at its best.
Which begs a number of questions.
How can the National Guard enforce the law without being racist and profiling people? And how does that make them different from the state agencies enforcing the law? For that matter how are the state agencies enforcing the law any different from Federal agencies enforcing the law? In short, if it's racist and ill-advised to enforce Arizona's immigration law (which mirrors Federal law), and the President now is sending troops to enforce the law, does that make our President a racist?
These questions are easily asked, although it's hard to ask them without mirth.
The simple fact of the matter is that the Feds have all but abdicated responsibility on the immigration problem. They've simply done nothing. What you're seeing now is a belated attempt to put spin on a problem that demands action.
While I'm ranting, lets talk about the little spill in the Gulf. The British Petroleum disaster. It seems that the President is getting testy with aides who are briefing him on the response. "Plug the damn hole," Obama told them. I'm sure BP would love to know just how in the hell he proposes to do that. That's what they've been trying to do for over a month.
Our President has no clue how to solve our problems and he's making it up as he goes along. This Presidency is kabuki theater at its best.
Marriott's Policy
Last week I emailed Marriott Hotels and asked about the problem at the Charlotte Marriott City Center Hotel during the Forum for Firearms Education function last week. They replied this morning.
Dear Valued Guest,To which I replied.
Thank you for contacting Marriott. We appreciate the opportunity to provide you with information.
We would like to thank Grass Roots North Carolina/Forum for Firearms Education for its business at the Charlotte Marriott City Center hotel. During the group's stay, there was some confusion regarding the hotel's position on the carrying of firearms by the public. It has been the hotel's long-standing policy to not allow firearms by the public on the premises. In accordance with applicable law, this policy is posted in several locations around the hotel. The permanent notice at the hotel's entrance had been removed during a recent renovation and was replaced with temporary signage. This temporary posting was removed for a brief period of time, which may have led to guest uncertainty. We sincerely regret and apologize for any confusion or inconvenience this may have caused.
Marriott’s policy is to comply with all applicable laws and ordinances. We are a hospitality company that provides public accommodations and space for events and functions. We do this without regard to the lawful purpose or views of any specific group or organization. As always, the safety and security of our guests and associates is a top priority.
Regards,
Marriott Customer Care
Sorry to hear that. You won't ever have to worry about me using a Marriott hotel again.
Summer Weather
It's hot out there. Over 90F on my back patio before the noon hour. Time to come inside and cool off. I've been running errands, doing projects, cleaning a corner of the garage. I've got an oscillating fan around here somewhere and I need to put it on the reloading bench.
Monday, May 24, 2010
Meat Pies
My youngest son is making meat pies. These are a staple food around Natchitoches, LA. A simple crust filled with a meat filling, they are a folk food, some say Spanish, some say French, I think they're Creole. Regardless, Milady has a good basic recipe that's served thousands of these things, and it works good every time. Some folks try to use pie-crust, but most pie crust tends to puff up when it fries and what you want in a meat pie is a thin, flaky crust.

That's what 64 meat pies look like. Traditionally they're deep-fried, but you can bake them for a more heart-healthy meal. Serve them with rice and gravy, or dirty rice. A big pitcher of iced tea, a salad, and you've got supper.
They look good, Son. We'll have to cook a batch in Gatlinburg this summer. You're brother-in-law JimBob thinks he can make meat pies and wants to challenge you to a cook-off. I'll make the dirty rice.

That's what 64 meat pies look like. Traditionally they're deep-fried, but you can bake them for a more heart-healthy meal. Serve them with rice and gravy, or dirty rice. A big pitcher of iced tea, a salad, and you've got supper.
They look good, Son. We'll have to cook a batch in Gatlinburg this summer. You're brother-in-law JimBob thinks he can make meat pies and wants to challenge you to a cook-off. I'll make the dirty rice.
Support Dropping
A recent Rasmussen Report survey shows that 63% of Americans support repealing ObamaCare.
Support for repeal of the new national health care plan has jumped to its highest level ever. A new Rasmussen Reports national telephone survey finds that 63% of U.S. voters now favor repeal of the plan passed by congressional Democrats and signed into law by President Obama in March.Isn't that interesting? Still, the news gets worse.
Not only has support grown for repeal overall, it has also grown broadly in the electorate. Majorities of both men (65%) and women (62%) want ObamaCare repealed. Majorities in every age demographic want it repealed as well, including a shocking 70% of 18-29YO voters, which normally form the base of Barack Obama’s age-demographic support. That includes a 47% plurality that strongly supports repeal, suggesting that younger voters have finally realized that ObamaCare uses them to subsidize insurance premiums of older Americans.Interesting, damned interesting.
Hydrangea
Milady likes hydrangeas and pointed my interest to one she's got growing in the front yard.

Here's a close-up of the big bloom.

Lovely, isn't it? Remember to take time to notice the pretty things.

Here's a close-up of the big bloom.

Lovely, isn't it? Remember to take time to notice the pretty things.
Ultra Hunter
Rivrdog asks about the H&R Ultra Hunter in comments:
However, those little rifles are deceiving. That barrel is 22" long and has a heavy profile, measuring 0.662 at the muzzle. The entire rifle is only 37.5 inches from heel to muzzle. It's very compact due to the short length of the action. When I first showed the rifle to my brother-in-law, (who has a penchant for heavy barreled custom beanfield rifles), he asked me if it has a bull barrel. I told him no, of course, but we both agreed that if appears to be a very stiff barrel with lots of steel for stability. If you go to the Shilen website, and use their contour guide for reference, the Handi barrels appear to be something between a #4 and a #5 contour. The rifle weighs 8 lbs with the scope.
This particular rifle, like most of my recent rifles, is a pawn-shop rifle. I've got $125.00 in it. It shoots my standard .308 load (43.0 grains Reloder 15, 168 Gameking) into 1.5 inches at 100 yards. I don't doubt I could find a load that gets it into the MOA level of accuracy, but I simply haven't had the time to do much load development for it. It'll become a "grankid rifle" and one of them will wind up dragging it through thick-and-thin. Hopefully this summer, I'll find The Load for that particular rifle.
Do they make that .308 rifle with a heavier target barrel of target length?No, old friend, that is the heaviest barrel they make in .308.
However, those little rifles are deceiving. That barrel is 22" long and has a heavy profile, measuring 0.662 at the muzzle. The entire rifle is only 37.5 inches from heel to muzzle. It's very compact due to the short length of the action. When I first showed the rifle to my brother-in-law, (who has a penchant for heavy barreled custom beanfield rifles), he asked me if it has a bull barrel. I told him no, of course, but we both agreed that if appears to be a very stiff barrel with lots of steel for stability. If you go to the Shilen website, and use their contour guide for reference, the Handi barrels appear to be something between a #4 and a #5 contour. The rifle weighs 8 lbs with the scope.
This particular rifle, like most of my recent rifles, is a pawn-shop rifle. I've got $125.00 in it. It shoots my standard .308 load (43.0 grains Reloder 15, 168 Gameking) into 1.5 inches at 100 yards. I don't doubt I could find a load that gets it into the MOA level of accuracy, but I simply haven't had the time to do much load development for it. It'll become a "grankid rifle" and one of them will wind up dragging it through thick-and-thin. Hopefully this summer, I'll find The Load for that particular rifle.
Sunday, May 23, 2010
Sunday Morning Dawg
Sometimes little people come over to visit and when they do, the dog is amazed that someone is closer to his size. He's got to investigate.

He's always very gentle with toddlers, but he's got to see what little people are about.

He's always very gentle with toddlers, but he's got to see what little people are about.
Saturday, May 22, 2010
I was taking photos today for an article on Castbullet and had all my Handi-rifles out for the project.
These little rifles are addictive, to the point where I have four rifles and a shotgun, all based on the same action. The little action is very simple and that appeals to me in a big way. To my way of thinking, they're great rifles for beginning shooters, and very adequate for most hunting tasks.

From left to right, they are:
.410 Partner shotgun
.45-70 Handi Rifle with WGRS peep sight
.30-30 Handi Rifle with old Tasco 3X9 scope
.308 Ultra Hunter with 3X9 Simmons scope
.223 Ultra Hunter with 6X18 Swift Premium scope
I've hunted with the .45-70. I use it during our states Primitive Firearm deer season. The .308 and .30-30 will eventually become grandkid rifles.
If the idea of a single-shot rifle appeals to you, it's hard to beat one of these little rifles. Lots of folks say that the .30-30 is a very accurate caliber in the Handi platform, although I haven't found yet a load that shoots as accurately as I like. I hope to do some more shooting with it next week. The .223 is so new I haven't even sighted the scope yet, but I'll take it out when I take the .30-30.
These little rifles are addictive, to the point where I have four rifles and a shotgun, all based on the same action. The little action is very simple and that appeals to me in a big way. To my way of thinking, they're great rifles for beginning shooters, and very adequate for most hunting tasks.

From left to right, they are:
.410 Partner shotgun
.45-70 Handi Rifle with WGRS peep sight
.30-30 Handi Rifle with old Tasco 3X9 scope
.308 Ultra Hunter with 3X9 Simmons scope
.223 Ultra Hunter with 6X18 Swift Premium scope
I've hunted with the .45-70. I use it during our states Primitive Firearm deer season. The .308 and .30-30 will eventually become grandkid rifles.
If the idea of a single-shot rifle appeals to you, it's hard to beat one of these little rifles. Lots of folks say that the .30-30 is a very accurate caliber in the Handi platform, although I haven't found yet a load that shoots as accurately as I like. I hope to do some more shooting with it next week. The .223 is so new I haven't even sighted the scope yet, but I'll take it out when I take the .30-30.
California Penal Code
Check this out. There's more hypocrisy here than I can wrap my tiny little brain around. My buddy David sent me an email talking about the California Penal Code mirroring Federal Immigration Law. Of course, I called bullshit and started an internet search of the California Code. Look what I found:
It looks like California Law mirrors Federal law, just as Arizona law does. Ain't that amazing?
834b. (a) Every law enforcement agency in California shall fully
cooperate with the United States Immigration and Naturalization
Service regarding any person who is arrested if he or she is
suspected of being present in the United States in violation of
federal immigration laws.
(b) With respect to any such person who is arrested, and suspected
of being present in the United States in violation of federal
immigration laws, every law enforcement agency shall do the
following:
(1) Attempt to verify the legal status of such person as a citizen
of the United States, an alien lawfully admitted as a permanent
resident, an alien lawfully admitted for a temporary period of time
or as an alien who is present in the United States in violation of
immigration laws. The verification process may include, but shall not
be limited to, questioning the person regarding his or her date and
place of birth, and entry into the United States, and demanding
documentation to indicate his or her legal status.
(2) Notify the person of his or her apparent status as an alien
who is present in the United States in violation of federal
immigration laws and inform him or her that, apart from any criminal
justice proceedings, he or she must either obtain legal status or
leave the United States.
(3) Notify the Attorney General of California and the United
States Immigration and Naturalization Service of the apparent illegal
status and provide any additional information that may be requested
by any other public entity.
(c) Any legislative, administrative, or other action by a city,
county, or other legally authorized local governmental entity with
jurisdictional boundaries, or by a law enforcement agency, to prevent
or limit the cooperation required by subdivision (a) is expressly
prohibited.
It looks like California Law mirrors Federal law, just as Arizona law does. Ain't that amazing?
ICE
No, not the frozen water. This ICE is the Immigration and Customs Enforcement. These are the folks that deport illegal aliens. However, it looks like they might decline to deport illegals reported from Arizona.
All public servants are subject to the various malfeasance statutes. I personally don't have a problem with indicting some of these idiots and having them explain to a Court why they're not doing the job they were hired to do. In Morton's case, that includes enforcing the immigration law.
Hat tip, Alphecca.
A top Department of Homeland Security official reportedly said his agency will not necessarily process illegal immigrants referred to them by Arizona authorities.And, just why-the-hell-not?
"I don't think the Arizona law, or laws like it, are the solution," Morton told the newspaper.Wait a minute, there, Morton. The Arizona law mirrors US law, which you guys should have been enforcing in the first place. The reason Arizona enacted that legislation is because you weren't doing your job in the first place. Maybe, just maybe, if you weren't malfeasant, Arizona wouldn't have had to enact legislation like this.
The best way to reduce illegal immigration is through a comprehensive federal approach, he said, and not a patchwork of state laws.
All public servants are subject to the various malfeasance statutes. I personally don't have a problem with indicting some of these idiots and having them explain to a Court why they're not doing the job they were hired to do. In Morton's case, that includes enforcing the immigration law.
Hat tip, Alphecca.
Contacts
Like most folks, I've been using my email provider for almost 10 years. This morning I was looking for an email address and scrolled down through my contacts. There are folks in there that have been dead for several years and other folks I didn't have a clue who they might be.
So, I spent twenty minutes cleaning out my contacts. In another ten years I'll do that again.
So, I spent twenty minutes cleaning out my contacts. In another ten years I'll do that again.
Friday, May 21, 2010
Calderon is a Hypocrite
Mexico's president Calderone told Wolf Blitzer that Mexico requires people to show documentation and that illegal aliens aren't able to work in Mexico.
The man doesn't like Arizona law (which mirrors US law) but he deports illegal immigrants he finds in Mexico. He's a hypocrite.
BLITZER: Do Mexican police go around asking for papers of people they suspect are illegal immigrants?Yet, when he comes to the United States, Calderon rips the US for doing the very thing he says Mexico does.
CALDERON: Of course! Of course!
BLITZER: If somebody sneaks in from Nicaragua or some other country in Central America through the southern border of Mexico and they wind up in Mexico, they can going get a job?
CALDERON: No, no, no.
BLITZER: They can work?
CALDERON: If somebody do that without permissions, we send — we send back them.
WASHINGTON -- As Mexican President Felipe Calderon ripped Arizona's law clamping down on illegal immigrants in front of Congress on Thursday, Democrats and White House officials rose to their feet to cheer, including Attorney General Eric Holder and Homeland Security Secretary Janet Napolitano -- two officials who have confessed to not even reading the law.
The man doesn't like Arizona law (which mirrors US law) but he deports illegal immigrants he finds in Mexico. He's a hypocrite.
Dozer
I got up this morning, wondering what I was going to do today, my first day off on summer holiday. About 7:15, the phone rang. Second son needed my help with putting the tracks back on his bulldozer.

Final drives installed with new steering clutches, but the track is off. In the picture above you're looking at the rear of the dozer. That big star-shaped thing is a drive sprocket and we've got to reinstall the tracks. Did I mention that nothing on a bulldozer weighs less than a cross-tie?

Tracks installed, the brakes need to be adjusted. Then we adjusted track tension, re-installed all the body panels and safety racks, bolted the seat to the transmission, then got ready to start it.

It fired right off, and he took it outside and tested everything. Brakes, clutches, blade controls, everything works like it's supposed to work. We backed it back into the shop so that he could change the thermostat and a few hoses and I headed back home. It's noon now and I'm about ready for some lunch.

Final drives installed with new steering clutches, but the track is off. In the picture above you're looking at the rear of the dozer. That big star-shaped thing is a drive sprocket and we've got to reinstall the tracks. Did I mention that nothing on a bulldozer weighs less than a cross-tie?

Tracks installed, the brakes need to be adjusted. Then we adjusted track tension, re-installed all the body panels and safety racks, bolted the seat to the transmission, then got ready to start it.

It fired right off, and he took it outside and tested everything. Brakes, clutches, blade controls, everything works like it's supposed to work. We backed it back into the shop so that he could change the thermostat and a few hoses and I headed back home. It's noon now and I'm about ready for some lunch.
Thursday, May 20, 2010
Graduates
I was over at Alphecca, a daily read, and he took me to this article at Bloomberg.
Our high school just graduated a new class and those folks are now in the entry-level marketplace. Some part-time, getting ready for college in the fall, some looking for full-time work in the trades or the burger flipping/table waiting market. There's nothing wrong with that. They call them entry-level jobs for a reason.
But, this is still the United States and we still reward tenacity. If you've put in 100 applications, keep looking, keep applying, keep striving. Put in 100 more applications.
We need jobs in this country and I'm not convinced that the current administration understands how to stimulate the economy. Everything they've done so far has appeared to be a dismal failure.
Ten months after graduating from Ohio State University with a civil-engineering degree and three internships, Matt Grant finally has a job -- as a banquet waiter at a Clarion Inn near Akron, Ohio.The job market is tough right now. Lots of people on the street and fewer jobs than applicants.
“It’s discouraging right now,” said the 24-year-old, who sent out more than 100 applications for engineering positions. “It’s getting closer to the Class of 2010, their graduation date. I’m starting to worry more.”
Our high school just graduated a new class and those folks are now in the entry-level marketplace. Some part-time, getting ready for college in the fall, some looking for full-time work in the trades or the burger flipping/table waiting market. There's nothing wrong with that. They call them entry-level jobs for a reason.
But, this is still the United States and we still reward tenacity. If you've put in 100 applications, keep looking, keep applying, keep striving. Put in 100 more applications.
We need jobs in this country and I'm not convinced that the current administration understands how to stimulate the economy. Everything they've done so far has appeared to be a dismal failure.
Wednesday, May 19, 2010
Winchester!
I remember back in the day, every serious shotgunner used a Winchester Model 12. Every serious rifleman used a Winchester Model 70. Every serious levergunner had a Model 94, or a Model 92.
Then, Winchester was gone.
It looks like they're back and no one told me.
They're back with a whole lot of guns that I used to drool over. The Model 101, the Model 70, 94, and 92. They're even building a High Wall.
Then, Winchester was gone.
It looks like they're back and no one told me.
They're back with a whole lot of guns that I used to drool over. The Model 101, the Model 70, 94, and 92. They're even building a High Wall.
Subscribe to:
Posts (Atom)